ARCHIVES

August 2011
July 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
August 2008
July 2008
June 2008
May 2008
March 2008
February 2008
January 2008
November 2007



CONTACT
About this blog: Computers hate me. They really do. Every time I try to do something unusual like add new hardware, something is guaranteed to go wrong. I decided to start writing about my constant problems so that someone else might benefit from my experiences - or at least laugh at them!

  Problem with top cover seal on hard drive

20 July 2008, 11:13pm      



3 seals visible - the middle one is not quite right

Top: normal seal.   Bottom: suspect seal.

I noticed something unusual when I was shifting HDs around for better air circulation - all of the drives have their seal looking neat and perfect, except for one. At first I thought it was dust, but when you look at it closely it's obvious that it's imperfections in the seal. Kind of worrying. Perhaps this will be the next drive to fail...




Related posts:
More woes with Intel Matrix and/or hard drives
A complete list of all recent hard drive failures in the office
Beware of HDDerase reducing your hard drive capacity
Seagate: Reallocated sector count on "new" drive = 99
Don't unplug a mounted drive under FreeBSD!
4th WD drive failure